How to clean silver at home: effective methods
Everybody has silverware in the house, be it silver, interior objects or jewelry. Over time, this metal tends to lose its luster and darken. However, to bring it into its original form is not at all difficult, if you know what and how to clean silver at home.
Silver darkens and tarnishes for several reasons. For example, with high humidity in the room, with frequent contact with skin, cosmetics or perfume. To keep silver in good condition, wipe the products once a month with a soft cloth, this will preserve shine and polish the surface.
How to clean silver - the basic rules
To avoid microscratches and hooks on products, you can not use coarse sponges or abrasives to clean them. The consequences of improper care alone are quite problematic; only specialists in the workshops will be able to cope with them.
To preserve the purity and brilliance of silver, once a month, it is enough to soak the products in soapy water for a short time, and then wipe dry with a chamois cloth, while polishing the surface.
There is a large assortment of special silver care products that will cope with cleaning even heavily soiled items. Dipping silver into a special liquid and then processing it with a cloth intended for this purpose, you will get a brilliant, bright product that will permanently retain its unique look.
Home care products for silver
It is not always possible to buy store supplies or donate items to jewelry workshops. In this case, you can use proven and no less effective methods of silver cleaning at hand. Components for such a procedure can be found in every home, and they are quite inexpensive.
It is considered one of the most effective means of cleaning silver at home. Before cleaning the product, hold the product in soapy water for several minutes, then remove and dry with a soft cloth.Soda is dissolved in a small amount of water to a paste; it gently cleans the blackened areas.
Soda is applied directly to the finger or to a cotton pad or stick. It is necessary to work very carefully, without pressure, otherwise you can scratch the surface.
Another proven and effective tool. To use it to clean the silver, mix a spoonful of clean chalk with ammonia before the formation of a pasty mass. She and should clean the product to eliminate darkening and shine.
There is another recipe: ammonia is mixed with water in a ratio of 1:10, silver is immersed in the resulting solution for 20 minutes, then washed with water and wiped dry.
It will become an indispensable assistant and will help to return the silver shine to its former objects. However, it is worth remembering that only pure silver is recommended to clean with peroxide. Products with stones and inserts from other metals cannot be cleaned by this method. Peroxide, entering into a chemical reaction with various surfaces, can cause the formation of difficult to remove plaque.
It will also help tidy up silver things. Dissolve 200 g of citric acid in a liter of water, place the product in a container with a solution and put it all in a water bath. After the water boils, keep the water bath on the fire for another half hour. Then rinse the silver in running water and wipe dry.
It is used to clean silver surfaces. 6% or 9% of the vinegar solution is slightly heated, then a cloth is moistened in it and the surface is carefully treated.
There are other popular methods that give shine to silver things. Among them are grated raw potatoes, ashes mixed with lemon juice, and even yogurt.
Toothpaste and tooth powder are widely used. A simple office eraser will also help to cope with the dark patina.
Clearing jewelry where there are gems is best in jewelry shops. Homemade methods should be applied as carefully as possible. It is categorically not suitable for any methods where immersion of the product in any solution is applied.
You can only slightly treat the surface mechanically, without touching the stone, otherwiseentering into a chemical reaction with a cleaning agent can result in a very unpredictable result.
After cleaning the silver stuff
She needs a couple of days to give a little "rest." This is done to ensure that the natural protective sheath reappears on it, which was removed during the polishing process.
Another option is to attribute silver to the master, who will clean it and cover the product with a thin layer of special varnish to preserve and prevent darkening.